‎Sensors | Page 2 | SimpliSafe Support Home
Skip to main content

Conversation List

Filter by

(53)
SA
How To Replace Motion Sensor Gen 1 Battery

The Motion Sensor takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 5 years depending on placement and usage.To change your Motion Sensor battery, slide the sensor up and off its bracket. Then replace the battery and slide it back onto its bracket.If your sensor is still o

Battery / Power

Help Center Article

 • 

Motion Sensor Gen 1

SA
How to Replace Motion Sensor Gen 2 Battery

Are you receiving a low battery warning on your Motion Sensor Gen 2 shortly after installing the sensor? If so, this may be related to a firmware issue rather than a low battery within the device. The Motion Sensor Gen 2 takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 4

Battery / Power

Help Center Article

 • 

Motion Sensor Gen 2

SA
How To Replace Glassbreak Sensor Battery

The Glassbreak Sensor takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 3 years depending on placement and usage.To change your Glassbreak Sensor battery, slide the sensor up and off its bracket. Then, replace the lithium battery and put the device back in place.If your se

Battery / Power

Help Center Article

 • 

Glassbreak Sensor

SA
How To Replace Water Sensor Battery

The Water Sensor takes a single CR-2032 Lithium 3V battery and has a life expectancy of up to 5 years depending on placement and usage.To change your Water Sensor battery, twist the bottom and top apart and replace the battery inside. To close it again, make sure that the grooves are aligned before

Battery / Power

Help Center Article

 • 

Water Sensor

SA
How To Replace Temperature Sensor Battery

The Temperature Sensor takes a single CR-2032 Lithium 3V battery and has a life expectancy of up to 5 years depending on placement and usage.To change your Temperature Sensor battery, remove it from its bracket to expose the battery compartment. Then replace the battery and slide the sensor back int

Battery / Power

Help Center Article

 • 

Temperature Sensor

SA
Motion Sensor Gen 2 Installation Guide

OverviewMotion Sensors are always on the lookout for uninvited guests. They can detect motion within 35 feet, with a 90-degree field of view. The Motion Sensor Gen 2 also has Pet Mode to distinguish between people and pets.Before Getting StartedYou’ll need to install your Base Station and make sure

Install / Set Up Help

Help Center Article

 • 

Motion Sensor Gen 2

SA
Motion Sensor Gen 2 Not Responding

If your Motion Sensor Gen 2 reports a ‘Not Responding’ error through the SimpliSafe® Mobile App, there are 3 quick steps you can take to resolve this. The following article will walk you through the steps needed to solve the issue and clear the error from your app.Step 1: Updating Your Base Station

Errors / Warnings

Help Center Article

 • 

Motion Sensor Gen 2