Conversation List

Filter by

(52)
Entry Sensor Alert Voice Prompt

Entry Sensor Alert* enables your Base Station to announce the Entry Sensor by name whenever it is opened. For example, if you open the front door you might hear your Base Station reply with “Front Door Entry Sensor open” instead of the usual chime. This feature is setup on a per sensor basis, so you

Help Center Article

 • 

Entry Sensor

SA
Entry Sensor Offline

NOTICE: To ensure optimal performance of your sensor, we recommend updating your Base Station firmware to 2.21.4.6. You can manually run an update by using the SimpliSafe® Mobile App and navigating to My System > Base Station Settings > Firmware and tapping on Update Available. If you're experiencin

Help Center Article

 • 

Entry Sensor

SA
How To Replace Glassbreak Sensor Battery

The Glassbreak Sensor takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 3 years depending on placement and usage. To change your Glassbreak Sensor battery, slide the sensor up and off its bracket. Then, replace the lithium battery and put the device back in place. If your

Help Center Article

 • 

Glassbreak Sensor

SA
How to Replace Motion Sensor Gen 2 Battery

Are you receiving a low battery warning on your Motion Sensor Gen 2 shortly after installing the sensor? If so, this may be related to a firmware issue rather than a low battery within the device. The Motion Sensor Gen 2 takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 4

Help Center Article

 • 

Motion Sensor Gen 2

Low Battery Warning for Motion Sensor Gen 2

The Motion Sensor Gen 2 takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 4 years depending on placement and usage. ​If you are receiving this error shortly after installing your Motion Sensor Gen 2, this may be related to a firmware issue rather than a low battery within

Help Center Article

 • 

Motion Sensor Gen 2

SA
What's the difference between Entry Delay, Exit Delay, and Instant Trigger?

Your Entry Sensor comes equipped with several modes that can help you with arming your system, disarming it, and triggering an alarm event the moment the sensor is triggered. Below you can learn more about what each mode does and how it impacts the usage of your system. Scroll to learn more, or use

Help Center Article

 • 

Using Your System

SA
How To Change The Entry Sensor's Chime Volume

When your system is disarmed and an Entry Sensor is opened, it will relay a chime to the Base Station to notify you of the potential intrusion. This chime is set to medium by default but can be toggled to OFF, LOW, MEDIUM, or HIGH at any time from the SimpliSafeª Mobile App, Web App, or Keypad. Simp

Help Center Article

 • 

Entry Sensor