‎Cameras | Page 10 | SimpliSafe Support Home
Skip to main content

Conversation List

Filter by

(108)
Video Doorbell Pro Requirements

The Video Doorbell Pro is designed to replace an existing wired doorbell with a mechanical chime. If your home does not have a wired doorbell, you will need to install wiring first in order to use the Video Doorbell Pro.Below is a list of what is needed to install Video Doorbell Pro within your home

Install / Set Up Help

Help Center Article

 • 

Video Doorbell Pro

How to Reset the SimpliCam® Wired Indoor Camera

If your SimpliCam® Wired Indoor Camera encounters an error that cannot be resolved by normal troubleshooting, performing a factory reset on the camera may be necessary. To reset the SimpliCam®, you’ll first need to remove it from the SimpliSafe® Mobile App.To remove the SimpliCam®:Open the SimpliSaf

Troubleshoot an Issue

Help Center Article

 • 

SimpliCam

How to Reset the Video Doorbell Pro

If you run into an issue with your Video Doorbell Pro that cannot be resolved through normal troubleshooting, you may need to reset* the device. Performing a Soft ResetPerforming a soft reset on the Video Doorbell Pro can help clear it from an unresponsive state. It will also test that the device ha

Troubleshoot an Issue

Help Center Article

 • 

Video Doorbell Pro

SA
SimpliCam Wired Indoor Camera LED Status Light Colors

The camera LEDs are designed to help inform you of what your camera is doing. You can turn the LEDs off in your camera’s settings. Note that the little red light beneath the LED is the infrared sensor, which is activated at night. The privacy shutter will still prevent the camera from recording if i

LED / Lights

Help Center Article

 • 

SimpliCam

SA
Video Doorbell Pro LED Usage Status Light Colors

The Video Doorbell Pro's camera LED status light behaves differently during installation and daily use. This can be configured in settings. ​To learn more about the LED status light’s behaviors during installation, please visit here.The lights listed below are the only colors that the doorbell

LED / Lights

Help Center Article

 • 

Video Doorbell Pro

SA
Smart Alarm Wireless Indoor Security Camera LED Status Light Colors

The status light (located on the front of your Smart Alarm Wireless Indoor Security Camera indicates the mode of the camera.  It can tell you at a glance if your camera is updating, recording, or if someone is live streaming the feed. Below is a chart of the light colors that you can expect to see w

LED / Lights

Help Center Article

 • 

Smart Alarm Indoor Camera

SA
SimpliCam® Wired Indoor Camera Installation Guide

OverviewKeep an eye on your home with HD video that you can live stream from your phone, tablet, or computer with the SimpliCam® Wired Indoor Camera. The SimpliCam® alerts you the instant it detects motion so you can see what’s happening and take action through its 2-way audio. Enhance your recordin

Install / Set Up Help

Help Center Article

 • 

SimpliCam