‎Entry Sensor | SimpliSafe Support Home
Skip to main content

Conversation List

Filter by

(18)
SA
Entry Sensor Installation Guide

Entry Sensors defend your doors and windows. The Base Station will sound a quick chime when a door or window opens while your system is disarmed. Depending on your settings, this can also be set to trigger an alarm.

Install / Set Up Help

Help Center Article

 • 

Entry Sensor

SA
How to Replace Entry Sensor Battery

The Entry Sensor takes a single CR-2032 Lithium 3V battery and has a life expectancy of up to 5 years depending on placement and usage. To change your Entry Sensor battery, slide the sensor up and off its' bracket. Then replace the lithium battery and slide the sensor back onto its bracket. If your

Battery / Power

Help Center Article

 • 

Entry Sensor

SA
Entry Sensor Not Responding

Sensors in the SimpliSafe® system will issue a “Not Responding” error when they fail to check in with the Base Station for more than 24 hours. We typically see this happen for one of two reasons: The battery within your Entry Sensor needs to be replaced The Entry Sensor is too far away from the Base

Errors / Warnings

Help Center Article

 • 

Entry Sensor

How Does the Entry Sensor Respond During an Alarm

When the system is in an armed state (Home or Away Mode) and an Entry Sensor is triggered, the entry countdown will begin. The entry countdown by default is 30 seconds, however, this can be adjusted at any time within the SimpliSafe® App. If the system is disarmed within 30-60 seconds of the initial

Install / Set Up Help

Help Center Article

 • 

Entry Sensor

SA
What's the difference between Entry Delay, Exit Delay, and Instant Trigger?

Your Entry Sensor comes equipped with several modes that can help you with arming your system, disarming it, and triggering an alarm event the moment the sensor is triggered. Below you can learn more about what each mode does and how it impacts the usage of your system. Scroll to learn more, or use

Customize your Settings

Help Center Article

 • 

Using Your System

How to Find the Serial Number for Your SimpliSafe® Device or Camera

During troubleshooting or for account verification purposes, you may be required to identify the serial number for a product within your system. You can easily find the serial number for your devices or cameras within the SimpliSafe® Mobile App. Using the SimpliSafe® Mobile App: Open the SimpliSafe®

Help Center Article

 • 

Product Support

How to Rename a SimpliSafe® Sensor

There may be a point where you need to rename a sensor for your SimpliSafe® System. Renaming a sensor can be done easily through the SimpliSafe® Mobile App, but you can also rename a sensor using your Keypad. The following will walk you through these steps for each platform so you can pick whichever

Features / Settings

Help Center Article

 • 

Sensors