‎Smoke Detector | SimpliSafe Support Home
Skip to main content

Conversation List

Filter by

(8)
How Does the Smoke Detector Respond During an Alarm

When the Smoke Detector detects particulate consistent with smoke, it will sound the alarm to notify you of the potential hazard.After the alarm has sounded two things will happen at once, depending on your monitoring plan. The first Primary Contact will receive a Push Notification, and also a phone

Install / Set Up Help

Help Center Article

 • 

Smoke Detectors

SA
How To Replace Smoke Detector Battery

The Smoke Detector takes a single Panasonic CR-123A Lithium 3V battery and has a life expectancy between 3-5 years depending on usage.To change your Smoke Detector battery, twist it off its bracket and open the back panel. Then, replace the lithium battery and put the device back in place.

Battery / Power

Help Center Article

 • 

Smoke Detectors

SA
Smoke Detector Installation Guide

The Smoke Detector alerts you at the first signs of smoke. Use this guide to install your Gen 3 SimpliSafe Smoke Detector.

Install / Set Up Help

Help Center Article

 • 

Smoke Detectors

SA
Preventing False Alarms From the Smoke Detector

SimpliSafe's Smoke Detectors use photoelectric sensors, meaning they detect smoke through the distortion of a light beam inside the detector. Photoelectric smoke detectors will detect smoke faster than other detector types but can occasionally result in a false alarm. False alarms often occur w

Errors / Warnings

Help Center Article

 • 

Smoke Detectors

What is the Constant Yellow Light on the Smoke Detector?

The Smoke Detector features a Tamper Switch, to make sure that the device is properly secured into its mounting bracket.It’s a small button on the back of the unit that is normally held down by part of the mounting bracket. When it is not held down properly, you will get a warning signal:Smoke Detec

LED / Lights

Help Center Article

 • 

Smoke Detectors

SA
Smoke Detector LED Status Light Colours

The Smoke Detector has several light states that reflect the status of the device and change with the presence of smoke within your home. This guide will highlight the various indicators and their meanings.IndicatorMeaningRed flashing light every 5–6 minutes and no soundsNormal.Red flashing light ev

LED / Lights

Help Center Article

 • 

Smoke Detectors

Testing the Smoke Detector

Test Mode is a great way to test the connection between your Base Station and other sensors. We recommend periodically placing your system into Test Mode to ensure that your sensors are still communicating with the Base Station without any errors.Placing Your System Into Test ModeDisarm your system

Troubleshoot an Issue

Help Center Article

 • 

Smoke Detectors