‎Motion Sensor Gen 2 | SimpliSafe Support Home
Skip to main content

Conversation List

Filter by

(15)
How do Motion Sensors Respond During an Alarm

When the system is in an armed state (Home or Away Mode) and a Motion Sensor detects motion within your home or business, the entry countdown will begin. The entry countdown by default is 30 seconds, however, this can be adjusted at any time within the SimpliSafe® App.If the system is disarmed withi

Install / Set Up Help

Help Center Article

 • 

Motion Sensors

SA
Motion Sensor Gen 2 False Alarms

False Alarm CausesOur Motion Sensors have been designed to avoid false alarms. However, if you’ve experienced one, there are a few potential issues that may cause them:Direct sunlight hitting the sensor can trigger a false alarm.Heating vents located in the room. If they are located within the senso

Troubleshoot an Issue

Help Center Article

 • 

Motion Sensor Gen 2

Low Battery Warning for Motion Sensor Gen 2

The Motion Sensor Gen 2 takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 4 years depending on placement and usage.​If you are receiving this error shortly after installing your Motion Sensor Gen 2, this may be related to a firmware issue rather than a low battery within t

Errors / Warnings

Help Center Article

 • 

Motion Sensor Gen 2

SA
How to Replace Motion Sensor Gen 2 Battery

Are you receiving a low battery warning on your Motion Sensor Gen 2 shortly after installing the sensor? If so, this may be related to a firmware issue rather than a low battery within the device. The Motion Sensor Gen 2 takes a single CR-123A Lithium 3V battery and has a life expectancy of up to 4

Battery / Power

Help Center Article

 • 

Motion Sensor Gen 2

SA
Motion Sensor Gen 2 Installation Guide

OverviewMotion Sensors are always on the lookout for uninvited guests. They can detect motion within 35 feet, with a 90-degree field of view. The Motion Sensor Gen 2 also has Pet Mode to distinguish between people and pets.Before Getting StartedYou’ll need to install your Base Station and make sure

Install / Set Up Help

Help Center Article

 • 

Motion Sensor Gen 2

SA
Motion Sensor Gen 2 Not Responding

If your Motion Sensor Gen 2 reports a ‘Not Responding’ error through the SimpliSafe® Mobile App, there are 3 quick steps you can take to resolve this. The following article will walk you through the steps needed to solve the issue and clear the error from your app.Step 1: Updating Your Base Station

Errors / Warnings

Help Center Article

 • 

Motion Sensor Gen 2

SA
Sensor Not Responding For Multiple Sensors

If you are seeing the error “Sensor Not Responding” for multiple sensors throughout your home, this may indicate an underlying issue with the placement of the Base Station that needs to be addressed.We recommend that you place your Base Station in a centrally-located area within your home or busines

Errors / Warnings

Help Center Article

 • 

Base Station