‎Fire checkbox on Monitoring Certificate | SimpliSafe Support Home
 
ricksly's profile

Wednesday, September 13th, 2023 3:59 PM

Fire checkbox on Monitoring Certificate

I have a smoke/co detector but on my certificate the fire box is not checked 

This post was created from this comment on different post

Official Solution

Community Admin

 • 

5.7K Messages

1 year ago

Hi @ricksly ,

Normally your account should be able to automatically recognize that you have a Smoke & CO Detector. But you can manually register it by putting your system into Test Mode:

  1. On your Keypad, press Menu, then type in your PIN
  2. Navigate to and select Test Mode
  3. You'll see the text "Test each device by pressing its button"
  4. On the Smoke & CO Detector, press the button on the face of the device
  5. On your Timeline in the SimpliSafe app or webapp, look for the entry confirming that the test signal was received

Once you see the confirmation on your Timeline, you can exit Test Mode. Then, download the Monitoring Certificate again. The correct box should now be checked.

New to the Community? Get started by reading our Welcome Article and please be sure to review our Community Guidelines before posting.