‎Secret Alerts = No Chime? | SimpliSafe Support Home
Skip to main content
 
TheRealLeoH's profile
TheRealLeoH

14 Messages

Thursday, May 5th, 2022 1:33 AM

Secret Alerts = No Chime?

I figured out how to set up secret alerts so I can see when my doors open and close when the system is disarmed. However the chime stopped playing. Do the secret alerts cancel out the chime or is it a coincidence and my system is glitching?

Post

 • 

Updated 

9 months ago

1.6K

5

Official Solution

davey_d

Community Admin

 • 

5.7K Messages

3 years ago

Hi @TheRealLeoH ,

Yes, the Secret Alert is just that - secret. It's meant for a situation where you don't want an intruder to know that the door is guarded. For example, if you want to keep your kids out of your liquor cabinet or gun safe, or a specific room in the house.

So unfortunately yes, when Secret Alerts are enabled, the chime for that sensor is disabled as well.

1

0

alja12

3 Messages

The chime has a manual setting and should be programmed to allow the user to choose whether or not to they want it with the secret alert. This limitation is poor programming and frustrating to users who need both the alert and chime.

Like

Reply

9 months ago

late_for_supper

1 Message

3 years ago

How do I get a chime sort of alert without the text?  That way I notice door or kitchen chime that lets me know someone is there.  

I want text for other reasons, not movement in my kitchen or front door.

2

0

davey_d

Community Admin

 • 

5.7K Messages

@late_for_supper​ the Door Chime feature is enabled by default. Are you not able to hear it from your Base Station whenever a door or window is opened?

Like

Reply

3 years ago

0

alja12

3 Messages

I've been with SimpliSafe for over nine years and this is a deal breaker for me. My mother has dementia and I need both the chime for the caregiver watching her in the home and the alert for those away from the home. What's really frustrating about this is that there is a setting especially for the chime. I should be able to manually turn on and off the chime regardless of the other settings. Now I have to look at another system and find one that does both. So frustrating.

Like

Reply

9 months ago

worthing

742 Messages

3 years ago

@davey_d commented earlier in this thread:

So unfortunately yes, when Secret Alerts are enabled, the chime for that sensor is disabled as well.

It's also worth noting, in case someone doesn't realize this, that when secret alert is enabled it also doesn't trigger an alarm or notify the monitoring center. In short, with secret alert enabled, all functionality is disabled EXCEPT for the notification that only you receive when the sensor is triggered.

If you have a door where you want secret alert (because you always want a notice when that door opens no matter what) AND you want an alarm to trigger on that door if it opens when the alarm is set then you need two physical sensors. One would be set to Secret Alert and the other would not be set to Secret Alert.

3

0

davey_d

Community Admin

 • 

5.7K Messages

@worthing​ that's a good callout, though I would add that with the Gen 3 system, you can choose which modes to have Secret Alert active in. So for example, you can have it enabled in Home or Off modes, but leave the default Alarm in Away Mode.

Like

Reply

3 years ago

0

LostPatrol

1 Message

Just got my system and would like to setup the secret alert system.  Any help would be much appreciated.

As of right now, in off mode, any door/window device is opened, I do not have any alert that the device is open.

Thanks,

Like

Reply

3 years ago

0

davey_d

Community Admin

 • 

5.7K Messages

@LostPatrol​ the setting is configured for each sensor. So you can find it in the SimpliSafe app under Menu > My System > Device Settings.

(edited)

Like

Reply

3 years ago

0

yawdroj

3 Messages

1 year ago

I just learned yesterday that any sensor set to secret alert will not chime when it is opened.   I wish there was a way to have both - so that I hear the chime when I'm in the house but get a text when I'm not (for example, if I'm working in the yard but the alarm isn't on).   It's nice to know when people are coming and going when I'm not in earshot of the chime.   Here's one vote for adding that option.

1

alja12

3 Messages

I need both and cannot wait for SimpliSafe. Have you found a system that does both? I need this too.

Like

Reply

9 months ago

0

ssuri03

5 Messages

1 year ago

it has been 2 years, do we have any update to alleviate this problem and fix the feature from SimpliSafe?  

0

New to the Community? Get started by reading our Welcome Article and please be sure to review our Community Guidelines before posting.

Related Conversations

Loading...

Was this post helpful?