‎VIdeo Doorbell corner kit for mounting | SimpliSafe Support Home
 
S

Friday, July 3rd, 2020 3:15 PM

VIdeo Doorbell corner kit for mounting

Anyone had to use a 90 degree corner kit to mount the video doorbell camera?  My doorbell is on a wall that is perpendicular to my front door that makes it necessary to turn the camera 90 degrees to view the approach to my door.  Simplisafe advised they only have a small wedge (it appears to be about 15 degrees) and that the wedges cannot be stacked to achieve 90 degrees.  I see that Ring makes a 90 degree corner kit but am unsure if the Simplisafe video doorbell will mount properly to this kit.

Captain

 • 

6.1K Messages

4 years ago

@scouch53 Amazon sells them.

100 Messages

4 years ago

The wedge they sell is also a vertical wedge meant to compensate for lap siding. It won't do squat for your situation (which is identical to my own).

I designed a 30% horizontal mount (which is plenty due to the very wide field of view) and posted the 3d model on thingiverse.  https://www.thingiverse.com/thing:3252620

If you have a 3d printer you can download that model for free and print one up. If you don't have a 3d printer, you just need to find somebody who has one and is willing to print one up for a reasonable fee. Of course, that's not allowed here......

3 Messages

4 years ago

I just received the door bell. My door bell is off to the side.  You would think that SimpliSafe would have this wedge option stackable kit included. How dumb it that. I would of paid an extra $15 for it. Now I have to go find an aftermarket. Not a good move SimpliSafe.

12 Messages

4 years ago

I found a 90 degree mount here: https://ebay.us/NucQhT

If you only need a 30 degree or 45 degree here is the link for it : https://ebay.us/V5csuV
hope it helps anyone else needing one for the SimpliSafe doorbell....

(edited)

New to the Community? Get started by reading our Welcome Article and please be sure to review our Community Guidelines before posting.