‎Entry Sensor Notification Questions | SimpliSafe Support Home
 
masonfoley's profile

Wednesday, December 8th, 2021 2:32 AM

Entry Sensor Notification Questions

Just received my installation package today and I'm installing the entry sensors. I've installed three so far but I've got a couple of questions.

  1. With the alarm mode "Off" for the entry sensor and the "alarm mode" disabled, I get a nice chime from the base when the sensor is "open" however no push notification to the phone or a timeline record. With the alarm mode "Off" and the "secret alert" set, I get a push notification that the sensor indicates "open". Is it not possible to have the base chime AND get a push notification?

  2. I get a push notification (and timeline record) reliably when the sensor is open. Is it not designed to tell you when it is "closed"?

Community Admin

 • 

5.7K Messages

3 years ago

Hi there,

The feature you're talking about is called Secret Alerts - because they're intended for generating a notification without letting anyone on the premises know that it had been triggered. It could be useful, for example, if you want to keep track of kids going into a certain room, but without triggering an alarm.

Right now no, there's no way to have the Smart Alert AND the Door Chime at the same time.

And no, the only trigger for events is when a sensor is going from Closed to Open, not the other way around. But on the SimpliSafe app, you can head over to the Devices section and hit the refresh button. That will poll all of the sensors and show you which ones are open right now.

8 Messages

@davey_d  - I appreciate the feedback.  I would suggest this be an option (chime + notification).  It would be even nicer if the sensor name was announced.  This is not an uncommon feature in security systems (i.e. 2GIG) so I was surprised to learn this was not supported.  

With regards to the closed status, this is another feature present in other security systems.  Burying this information in a menu three levels deep and requiring a manual refresh of the list is not an ideal user experience (not to mention, the refresh can take an inordinate amount of time. I've seen up to 10 seconds).

A generic/flexible approach would to make all of this configurable.  Perhaps default to a behavior that's not so chatty and works fine right out of the box but at least give the user more options.  For example, If I'm sitting in a room watching the game and I hear an announcement that a particular door has been opened (because my phone is muted)...and I'm not expecting that the door should be opened, that's a benefit...a safety benefit, arguably which is kinda the point. No, I don't want an instant trigger in that case, I would just like to be made aware.  I hear you saying what the "intent" of secret alerts...but it's a bit of a shoehorn from a usability standpoint in my opinion.  Why not leave it up to the user?  Defaults would make it simple; flexibility could be available for users looking to customize their experience.

Again, thanks for your reply.

4 Messages

@masonfoley​ I agree with you 100%. I was disappointed that this system does not allow this feature and is almost a deal breaker. The alarm system I had prior had this feature and that system is 11 years old. I want to be notified on my phone if my 7-year-old goes into the backyard or opens their windows. At this point, you need to double sensor your entry points, one for the alarm function and the other for secret alerts.

2 Messages

2 years ago

I would also like to get notified on my phone when a door entry sensor opens and closes. I don’t want it to trigger the alarm, but rather get the push notification so I’m aware the door has been opened. Is this a feature that can be added to the system? Thanks!  

Community Admin

 • 

242 Messages

Hi @sbcottleb​ 

While the system doesn't alert you to the entry sensor being closed at this time, we do have a feature that is similar to what you're asking for. It's called Secret Alerts. If you configure your sensors to be a secret alert, you'll receive a notification on your phone that the sensor has been tripped, rather than triggering an alarm or chime on the Base Station. 

1 Message

@alexandria_c

I would like for it to chime on the base station and send a notification when my toddler attempts to leave the house.

Community Admin

 • 

5.7K Messages

@RyanTheMan​ unfortunately right now, it's either you get the chime, or you get the notification, but not both. But thank you for the feedback.

1 Message

@davey_d @masonfoley I’ve spent at least 2 hours today with customer service trying to figure this out with no solution. Even with all these “specialists”, I did all of the troubleshooting myself with little to no help and its frustrating. Every one of their response appeared to be canned and from a reply bank.

I know this thread was from 2 years ago, but has there been a system update in regards to a chime/push notification when in Home mode?

Quite frankly, I don’t get this secret alert option at all. That completely defeats the purpose of what a security system is  intended for because by the time I would get this secret alert, my toddler could end up nowhere

to be found. Waiting for your reply. 

(edited)

Community Admin

 • 

3.4K Messages

@Bseriouss​ If an Entry Sensor is triggered while in Home Mode, the Base Station will chime but a push notification will not be sent. The only time you would receive a push notification when an Entry Sensor is opened is if Secret Alerts have been enabled for that sensor.

Secret Alerts are helpful if you want to be notified when a specific door has been opened, but you don't want others to know. Common use cases for Secret Alerts are for liquor cabinets and safes. You can learn more about Secret Alerts in this Help Center article.

1 Message

1 year ago

Seems flawed and limiting to not allow people to get as much security as they can out of a security system. I'll probably have to use Yo link for my entry system notifications sms and announcements with Alexa.

3 Messages

10 months ago

The fact that this problem has not been solved since the issue was raised over two years ago is really upsetting as a customer. I just installed the door sensors and I fully expected to be able to hear a chime and receive a notification on my phone. If I'm not in the room with the base station I won't hear the chime and if I am only receiving a notification on my phone and no chime sounds that does not alert a babysitter or someone else in the home that a door was open. I was just licensed as a foster home and this lack of capability is extremely frustrating. Now I have to go out and buy a second sensor that will chime when the door is opened because you can't fix your technology? That seems like really poor service on the part of SimpliSafe. 

Community Admin

 • 

3.4K Messages

@jdm9743​ Unfortunately there is not a setting that allows for a push notification and a Base Station chime when an Entry Sensor has been opened, but that idea has been passed along to our dev team. I'll bubble this request back up to them, but when we have any updates we'll post them over in this thread.

2 Messages

I've also just realised this feature is not possible and I've just set my system up a couple of weeks ago. 

Realising that Alexa integration and push notifications are not possible out of the box is a deal breaker and I'll be returning my system to replace with the Ring system.

3 Messages

@emily_s​ 

crickets?? I don’t understand why this feature has not been updated since people have been asking for years!!

1 Message

2 months ago

Deal breaker!  We just purchased this system too and did not realize there was no timeline history with triggered sensors.  We put this system in a vacation home even though we use Ring at our fulltime home, as I thought this would be a better system.  Without this simple historical timeline of knowing when doors are opened…I’m going to return it and go back to the ring which allows this feature!

3 Messages

1 month ago

Wish I would have known this before I bought the system. It would have been a deal breaker for me. Really disappointed to see that this post is 3 years old and it hasn’t been fixed yet. Every system I’ve had in the past always gave both an audible notification at the hub and a text/push notification. I hope this is truly being resolved and will be an option soon. 

3 Messages

1 month ago

It is absolutely absurd that this problem has not been fixed. It makes me truly angry with Simplisafe as a company. If I hadn't purchased the door sensors well after I had already installed my system I would have returned everything. 

New to the Community? Get started by reading our Welcome Article and please be sure to review our Community Guidelines before posting.