‎Error: Camera Battery Low | SimpliSafe Support Home

Error: Camera Battery Low

Updated 

What It Means

If you see a low battery warning on your Wireless Outdoor Security Camera, Outdoor Security Camera Series 2, or Smart Alarm Wireless Indoor Security Camera, that means that you need to charge its battery so it can continue recording video and live streaming. 

A snapshot of the SimpliSafe® Mobile App with an error message that says "Camera Battery Low."

How To Charge The Outdoor Camera’s Battery

To remove this error on the Outdoor Camera, take the following steps to charge its battery:

  1. Unmount the Outdoor Camera and twist off the cap to reveal the battery

  2. Remove the battery from the camera and plug it into your wall outlet using the charging cable the Outdoor Camera was shipped with and a USB power adapter with 5V, 1.5A+ output

    1. A list of adapters that fit this requirement are:

      1. The SimpliCam® Wired Indoor Security Camera’s adapter 

      2. The Smart Alarm Wireless Indoor Security Camera’s adapter

      3. Most iPhone (Apple) adapters

      4. Most Android adapters

  3. It takes about 6 hours for the battery to fully charge. You’ll know the battery is fully charged once all 3 lights are illuminated and no longer blinking.

  4. Insert the battery back into the Outdoor Camera with the 3 gold circles on the battery facing up and the battery tab facing outwards

  5. Twist the cap back on the camera clockwise until you hear it click

  6. Refresh the SimpliSafe® Mobile App by dragging the Overview screen down

You can learn more about preserving the battery life of the Outdoor Camera in this article. 

How To Charge The Smart Alarm Wireless Indoor Security Camera’s Battery

To remove this error on the Smart Alarm Wireless Indoor Security Camera, charge its battery by plugging it into a power source for 6 hours using a 5V, 7.5W USB power adapter that provides 1.5A of current. When the LED on the camera turns a solid white, that indicates that the battery is fully charged.

Once the battery is charged, refresh the SimpliSafe® Mobile App by dragging the Overview screen down.

If you would like to keep your Smart Alarm Wireless Indoor Security Camera constantly plugged into a power source, you can do so by either using any compatible power adapter, or you can purchase the Indoor Camera Power Adaptor from our online store or through select retailers.

Still Having Trouble?

If you still see this error message after charging your camera’s battery, you should reset the camera by following the steps in our Help Center below: