My Video Doorbell Pro Won't Connect to Wi-Fi During Setup
Updated
The Video Doorbell Pro will blink red in any instance where it’s having trouble connecting to Wi-Fi. If you are having trouble connecting your Video Doorbell Pro to Wi-Fi during its initial setup, we recommend making sure that your home network is configured to meet our system requirements.
A short list of requirements can be found below:
Your Wi-Fi network must be broadcasting 2.4GHz
SimpliSafe® cannot connect to 5GHz networks
Your SSID and password cannot exceed more than 31 characters each
Your network must be configured as WPA2 or WPA3/2 Mixed Mode
WPA3 only networks are not compatible with SimplISafe® at this time
We recommend troubleshooting your network by following the steps in the guided flow below.