The location of your camera can impact motion detection and activity alerts for your SimpliSafe® Active Guard Outdoor Protection service. Below are some recommendations to help get the most out of your Outdoor Camera Series 2.

• For optimal performance, mount it at 6 ½ feet

• If mounting above 6 ½ feet, utilize the permanent mount to secure your camera

• Ensure that the field of view is free from trees/bushes blocking it, which could sway and trigger false motion events

• When using SimpliSafe® Active Guard Outdoor Protection, make sure that you are within range of an outdoor-rated power outlet

There are 3 ways to determine if your service is active. 

On the Overview Tab of the SimpliSafe® Mobile App

When you are subscribed to Pro Plus or Pro monitoring plans, there will be a status indicator underneath your system's arming state that reads “Outdoor Protection” with an ON or OFF status next to it. This is the fastest way to determine whether or not your service is active. You can click on the (i) icon to the right to see more about your system status. 

When your system is disarmed, the status indicator will read OFF. In order for Outdoor Protection to be active (and for it to read as ON) you must have your cameras enrolled in SimpliSafe® Active Guard Outdoor Protection, have your system armed, and be within your monitoring hours according to your plan type (24/7 for Pro Plus Subscribers and 8pm-6am local time for Pro Subscribers).

Checking Your Monitoring Plan

You can also confirm that you are enrolled in Pro Plus or Pro by checking the status of your monitoring plan. This can be done by:

1. Opening the SimpliSafe® App on your phone or tablet

2. Navigate to the three-bar menu in the upper left corner of the app

3. Select Plan & Billing

4. Next to “Your Plan” you’ll see either Pro Plus or Pro Monitoring

If you need to subscribe to Pro Plus or Pro, you can upgrade your plan at any time within the mobile app.

Checking Camera Enrollment

You can also check which cameras are active within the SimpliSafe® Mobile App.

1. Open the SimpliSafe® Mobile App on your phone or tablet

2. Choose My System from the bottom navigation bar

3. Select Camera Settings

4. Tap on Outdoor Protection

5. On this screen, you can toggle ON and OFF the cameras you want to use

1. Note, you can only have 3 cameras total enrolled in this service. Visit our Help Center for a list of requirements.

6. Then, choose SAVE in the upper right corner to save your selections

Once you have set up your Outdoor Camera Series 2, you can enroll it and up to 3 cameras from your system. The only compatible cameras are Outdoor Camera Series 2 and Video Doorbell Pro. You must enroll at least one Outdoor Camera Series 2 to enable SimpliSafe® Active Guard Outdoor Protection for your Video Doorbell Pro.

There are two ways to enroll your cameras in SimpliSafe® Active Guard Outdoor Protection. The first is during the setup of your Outdoor Camera Series 2. The second is to enroll after setup using either the tile on the Overview tab or under Camera Settings.

SimpliSafe® Active Guard Outdoor Protection provides an extra layer of security outside of your home during your monitoring hours, based on your subscription. Pro subscribers will have access to SimpliSafe® Active Guard Outdoor Protection from 8pm-6am (local time), while Pro Plus subscribers have access to this service 24/7, so long as their system is armed.

When you’re ready to use SimpliSafe® Active Guard Outdoor Protection, simply arm your system to HOME or AWAY. HOME mode should be used when you are home and plan on staying inside for the day or night. While AWAY mode is designed to be used when you are away from your home. For example, you might arm your system to HOME when going to bed for the night, or you would choose to arm your system to AWAY if leaving for work, or going on a vacation.

SimpliSafe® Active Guard Outdoor Protection is designed to monitor outdoor spaces where human activity is a sign of a potential concern. Outdoor cameras enrolled in SimpliSafe® Active Guard Outdoor Protection should not be directed toward areas that have frequent household activity while the system is armed in either Home or Away mode. For example, customers shouldn't aim their camera directly at a busy sidewalk, an active parking area, a construction zone, or any outdoor living space that is in use while the system is armed.

Once your system is armed and you’re within your monitoring hours (24/7 for Pro Plus Subscribers and 8pm-6am local time for Pro Subscribers) SimpliSafe® Active Guard Outdoor Protection will be active and your camera(s) will work to detect possible threats outside of your home. If an individual is identified, the AI will try to determine a match between the person and a familiar face. If a match is made, no action will be taken by the agent. If a match cannot be made, an agent will determine if the person matches the familiar faces saved to your system, and engage if necessary. 

The “Familiar Face” feature is a great way for professional monitoring agents to know who should be allowed on your property. For example, you might want to create a familiar face for an in-law, neighbor, or maybe a dog walker. 

If a person is detected on your property, the service will use automatic face matching* to assist our agents in determining if the person matches any of your saved familiar faces. If the person on the property is unrecognizable, an expert SimpliSafe® monitoring agent will jump into action to assess the situation and behavior of the individual(s). If needed, they’ll initiate recorded two-way audio communication with the individual(s) via the camera to deter possible threats. When needed, the agent will use a siren, flash the spotlight, contact the homeowner, or request dispatch from emergency responders.

*Automatic face matching is available where permitted by law.

You can create a familiar face within the SimpliSafe® Mobile App either by using face clips from a motion event, or using the Add Familiar Face option and uploading an existing photo of an individual to create a familiar face.

Using Face Clips from a Motion Event to Create a Familiar Face:

1. Choose the Timeline tab at the bottom navigation bar

2. Select a Motion Event where face clips were detected

1. We recommend that you pick a motion event where the individual’s face is highly visible. Blurry or obstructed images make it difficult for our agents to make a face match

3. Tap on the video to enter the detection log

4. Tap on the profile icon with a plus sign in front of it next to a face detected within the timeline of the video footage

5. Follow the on-screen prompts to create a familiar face or add it to an existing one

Create a Familiar Face using the Add Familiar Face button and Uploading a Photo:

1. Choose My System from the bottom navigation bar

2. Select Familiar Faces

3. Tap Add Familiar Face

4. Enter the person’s real name

1. Do not enter a nickname or a description of the person in this field

5. Tap the plus button under “Uploaded Photos”

6. Allow access to your photos for SimpliSafe® when the pop-up on your device prompts you to do so 

7. Choose a photo to upload that features a single person’s face

1. Do not upload a photo that has multiple faces in it

2. Do not upload a photo that does not have any faces

3. Do not upload a photo that is of low quality/grainy

8. Preview the photo and tap Add to Familiar Face

9. Your photo is now added to the familiar face, and you can exit and return to the menu

If your Outdoor Camera Series 2 is facing a high-traffic area like a busy street or sidewalk, we recommend angling the camera down at a 30-degree angle to ensure that you’re only capturing the area you want to protect. This can help combat excessive motion alerts, as well as prevent false alarms with SimpliSafe® Active Guard Outdoor Protection.  

We recommend setting up Activity Zones to block unnecessary sources of motion, such as tree branches, sidewalks, or busy streets. Please note that this service is designed for residential use, and is not intended to cover busy parking lots, playgrounds, or other high-traffic areas. For more information on usage, please check out our Terms of Service.

To create Activity Zones, take the following steps:

1. Open up the SimpliSafe® Mobile App on your mobile device or tablet

2. Tap Cameras on the navigation bar at the bottom of the screen

3. Select the gear icon in the top right corner to open Camera Settings

4. Choose the Outdoor Camera you’d like to adjust

5. Tap Motion Detection

6. Under Activity Zone, tap the boxes in the frame where you do not want your camera to record

7. Tap Save in the top right corner to save this change

If you cannot change the angle of the Outdoor Camera, there are settings you can adjust in the SimpliSafe® Mobile App to minimize the amount of motion it detects.

Sensitivity

By default, the Outdoor Camera’s sensitivity is set to High, but you can adjust this setting to Medium or Low to limit the number of motion events you receive. 

You can adjust the sensitivity of your Outdoor Camera by taking the following steps within the SimpliSafe® Mobile App:

1. Open up the SimpliSafe® Mobile App on your mobile device or tablet

2. Tap Cameras on the navigation bar at the bottom of the screen

3. Select the gear icon in the top right corner to open Camera Settings

4. Choose the Outdoor Camera you’d like to adjust

5. Tap Motion Detection

6. Under Sensitivity, move the slider to Low

7. Tap Save in the top right corner to save this change

Motion Detection Type

The Outdoor Camera has two motion detection options: All Motion and People Only. When set to All Motion, the camera will record any motion it senses - which may cause excess motion events. However, if the camera is set to People Only it will only respond to people-shaped objects.

Note: When your Outdoor Camera Series 2 is enrolled in SimpliSafe® Active Guard Outdoor Protection, you will have different Motion Detection setting options available.

To minimize the amount of motion your Outdoor Camera detects, you can change its motion setting to People Only by following these steps:

1. Open up the SimpliSafe® Mobile App on your mobile device or tablet

2. Tap Cameras on the navigation bar at the bottom of the screen

3. Select the gear icon in the top right corner to open Camera Settings

4. Choose the Outdoor Camera you’d like to adjust

5. Tap Motion Detection

6. Under Motion Type, select People Only

7. Tap Save in the top right corner to save this change

SimpliSafe® Active Guard Outdoor Protection notifications are push notifications you will receive after an event has been reviewed by one of our expert monitoring agents. You can decide which SimpliSafe® verified outdoor events should trigger push notifications - such as Common Activity events or Person on Property events.

There is a difference between Camera Motion Notifications and SimpliSafe® Active Guard Outdoor Protection Notifications. Turning on Camera Motion Notifications allows the SimpliSafe® Mobile App to notify you when your camera detects motion. SimpliSafe® Active Guard Outdoor Protection Notifications are push notifications you receive after an event has been reviewed by one of our expert monitoring agents or our advanced AI. With SimpliSafe® Active Guard Outdoor Protection, you can refine when you would like to receive motion notifications, on a per-camera basis.