‎Extra Siren Installation Guide | SimpliSafe Support Home

Extra Siren Installation Guide

Updated 

Overview

Your Extra Siren is 4 times louder than the alarm built into your Base Station at a whopping 105dB, so it's sure to get the attention of any uninvited guests. It can also play a door chime when Entry Sensors are open, and a countdown when the entry or exit delays are triggered. The Extra Siren is rated for both indoor and outdoor use, so you can install it anywhere within your home such as near the front door or outside, under an eave.

Before Getting Started

Before installing the Extra Siren, make sure that you have installed your Base Station.

What’s in the Box

  • Extra Siren with mounting plate

  • Screws (optional for permanent installation)

If you want to mount your Extra Siren on a wall, make sure the surface has been wiped clean and has had time to dry.

If you want to screw mount your Extra Siren, you will also need your own Phillips Head screwdriver.

Watch the video below for a hands-on experience from our team of experts for the installation process

Use the guided flow below for an interactive, step-by-step experience that will help you through the installation process.

Troubleshooting

Related Articles