2 Messages
Need helping removing Video Doorbell from House
Hi,
We recently had to set up a new Wi-FI network so our doorbell disconnected The security screw is stripped and I couldn't find an extractor small enough at the store, so I drilled into the security screw, but still no luck in getting it off of the face plate. Any other suggestions on how to remove the doorbell as we haven't had a functioning camera there for over a month now?
We recently had to set up a new Wi-FI network so our doorbell disconnected The security screw is stripped and I couldn't find an extractor small enough at the store, so I drilled into the security screw, but still no luck in getting it off of the face plate. Any other suggestions on how to remove the doorbell as we haven't had a functioning camera there for over a month now?
simplisafe_admin
Community Admin
•
741 Messages
4 years ago
Your situation may prove to be a bit tough since you have already tried to drill out the security screw but some people have previously suggested putting a bit of hot glue on the end of the screwdriver, and then holding it in place on the screw until it dries. If that doesn't work out for you we should still be able to reset your Video Doorbell Pro without needing to take it off of its bracket.
In order for this to work, we will first need to get the camera back online. Since we can't do that through the use of the reset button and going back through the setup, we'll need to set up a temporary WiFi network that uses the same WiFi name and password that was in use when the Video Doorbell Pro was last working. You can either do this by changing your current WiFi credentials on your router, by creating a guest network with those credentials, or by setting up a hotspot on your phone using those credentials. Once that network has been set up, the Video Doorbell Pro should connect to it properly.
Once connected to the network again, you can remove the Video Doorbell Pro from your account. Whenever the Video Doorbell Pro is removed from an account while it's online, it will reset itself after about a minute. Once the Video Doorbell Pro has reset itself, you can connect it to your new WiFi network.
SimpliSafe Social Team
SimpliSafe Home Security
1
0
ktaylor2404
1 Message
1 year ago
now my camera isn't working at all. I deleted it and tried to add it back and it won't light up. Says it needs to charge. Now what
1
0
Wahaut
1 Message
5 months ago
How do I get the door bell camera off the mounting bracket
1
0
ac330
1 Message
30 days ago
Helped me! After 3 months of down time on my door bell camera I used my phone to imitate my old network. Instead of removing power from camera I found it easier to remove 1 wire at my door bell itself. I then deleted the camera in the app. Then installed as new.
Thank you!!
0
0