Video Doorbell Pro LED Status Lights
Updated
The Video Doorbell Pro gives you high definition video, two-way audio, and night vision so you can see and speak to visitors any time. The front of the camera is equipped with an LED status light to keep you informed at a glance.
Note: There are different light behaviors during setup and during day-to-day usage. The following video and charts will highlight to you what to expect during set up and day-to-day usage, as well as define what each status light means.
LED Behavior During Set Up
LED Color and Behavior | Description |
No Light | It can take up to 30 minutes for your camera to boot up after you first plug it in. If it’s been longer than that, check your wiring and contact support. |
Blinking White | Your camera is receiving power and is ready to be set up. |
Solid Yellow | The camera is rebooting or installing a firmware update |
Blinking Yellow | The camera is connected to internet but is not connected to SimpliSafe®’s servers (this may be visible for a short time after rebooting your camera) |
Blinking Red | The camera cannot connect to Wi-Fi |
LED Behavior for Daily Usage
LED Color and Behavior | Description |
Pulsing Blue | The doorbell button has been pressed, or motion has been detected by the camera’s sensor |
Solid Blue | Two-Way Audio has been initiated from within the SimpliSafe® Mobile App |
No Light | 1. No light will turn on when you initiate a live stream from within the SimpliSafe® Mobile App |
