My Video Doorbell Pro Stopped Connecting to Wi-Fi After Setup
Updated
The Video Doorbell Pro will have a blinking red light when it is not connected to your Wi-Fi network. If you had successfully setup your Video Doorbell Pro before and it is now experiencing issues connecting to your network, we recommend checking your Wi-Fi network to ensure it’s transmitting a 2.4GHz band, and that your SSID and password are not longer than 31 characters each.
If your Video Doorbell Pro is no longer connected to your Wi-Fi and its status light is showing a different color, refer to the table in the Video Doorbell Pro LED Usage Status Light Colors article.
If the Video Doorbell is not connected to Wi-Fi and its status light isn’t blinking at all, check that the mounting plate has good contact with the gold pins on the doorbell. Make sure that the mounting plate isn’t too tight that it is bending, preventing good contact with the gold pins. If something looks off or you’re not sure the Video Doorbell Pro is installed correctly, check out our installation guide for help.
If you are still having trouble reconnecting your Video Doorbell Pro to Wi-Fi after taking the above steps, we recommend running a Connection Check test in the SimpliSafe® mobile app to see if there are any issues between your network and Video Doorbell Pro.
How to Run a Connection Check:
Open the SimpliSafe® mobile app
Tap on the Cameras tab on the bottom of the screen
Select the gear icon in the upper right corner
Choose your Video Doorbell
Select Connection Check and follow the on-screen instructions to test your signal strength and upload speeds
Using your results, you can improve your Video Doorbell Pro’s connection with the tips below.
Camera Requirements:
Signal strength should be above -55dBm. A lower number means a greater connection between your camera and router.
If you have a low signal strength, you can try to troubleshoot your Wi-Fi network and improve your signal strength.
Upload speed needs to be above 2Mbps for 720p video
If your upload speed is below 2Mbps, you may need to contact your Internet Service Provider (ISP) to upgrade your internet package.
If your upload speed is exactly 2Mbps, you should take these steps to improve your upload speed.