​Overview

The Smoke & Carbon Monoxide Detector alerts you at the first sign of smoke or CO within your home. You should place this device near sleeping areas, ensuring that there is one on every floor within your home. If wall mounting your Smoke & Carbon Monoxide Detector, ensure that it is no more than 12 inches from the ceiling.

To avoid false alarms, we recommend installing the Smoke & CO Detector at least 10 feet away from any furnace, stove, or fireplace. Additionally, we recommend avoiding placing it in a garage or in any bathroom with a shower, as dust, debris, and steam have the potential to trigger false alarms.

We also recommend cleaning your Smoke & CO Detector once a month, to avoid false alarms from dust and debris build-up. 

Before Getting Started

Before setting up your Smoke & Carbon Monoxide Detector, you will need to install your Base Station and make sure that it is running the latest firmware. You can check for updates using the SimpliSafe® Mobile App or Keypad.

What’s in the Box

• Smoke & Carbon Monoxide Detector and its mounting plate

• Screws and drywall anchors

You will also need a Phillips Head screwdriver and a ¼” drill bit to complete the installation.

Watch the video below for a hands-on experience from our team of experts for the installation process

Use the guided flow below for an interactive, step-by-step experience that will help you through the installation process.

Troubleshooting

• Tampering Detected Error

• Preventing False Alarms From the Smoke & Carbon Monoxide Detector

• What is the Constant Yellow Light on the Smoke and/or CO Detector?

Related Articles

• How Does the Smoke & Carbon Monoxide Detector Respond During an Alarm

• What is the "Early Alert" Warning for the Smoke & Carbon Monoxide Detector?