Smart Lock Series 2 Overview and Installation Guide
Updated
Overview
The Smart Lock Series 2 makes sure that your door is always locked—even if you forget. It secures your door the minute you arm your system and unlocks it when you disarm. You can even set a timer to keep your door locked when you need it most. You don't even need a key. Just use the PIN Pad, Key Fob, or the SimpliSafe® Mobile App to lock up when you're home or away.
Unsure of which Smart Lock version you have?
You can learn more about this and see the difference on our Help Center!
Looking to purchase a Smart Lock Series 2? You can find the Smart Lock Series 2 for purchase on our website.
Before Getting Started
You’ll need to confirm that your existing door lock is a single-cylinder deadbolt. These deadbolts have a thumbturn on the inside of the door and a keyhole on the outside.
You will also need a Gen 3 SimpliSafe® System installed at your property, running the latest firmware version.
What’s in the box?
Smart Lock Series 2
4 AA Batteries (Pre-Installed Within the Smart Lock Series 2)
Mounting Plate
Tailpiece Adapters
PIN Pad
Release Tool
4 Deadbolt Screws
4 Wood Screws
Painter’s Tape
What you’ll need
A Phillips Head Screwdriver