Original SimpliSafe® Water Sensor Installation Guide
Updated
| Does your Keypad look like the one pictured to the left? Then you're in the right place! You've got the Original SimpliSafe® system. If you purchased a new system in 2018 or later, you likely have the Gen 3 SimpliSafe®. Click here to view the article for the Gen 3 SimpliSafe®. If you're not certain which system you have, you can tell the difference here. |
Please note that we no longer offer Water Sensors for the Original SimpliSafe® system. If you are having an issue with your Original SimpliSafe® Water Sensor, please contact support to find out how to upgrade your system.
The Water Sensor alerts you when there is a leak or flooding in your home. It can help prevent expensive water damage including mold, ruined furniture, and warped wood floors. Once the metal prongs make contact with water the Base Station will sound the alarm. If you are subscribed to professional monitoring you will receive a call from the monitoring company informing you of potential water damage. We recommend installing Water Sensors near bathroom plumbing to detect any leaks, overflows, or broken plumbing. You can also place a Water Sensor in the drip pan of your water heater, or washing machine.
To install your Water Sensor remove the white battery activation strip hanging from the battery compartment. Next, remove the liner of the adhesive strip located on the Water Sensor’s bracket, and adhere it to the wall, so that the metal prongs on the bottom of the sensor are right above the floor. Press and hold the Water Sensor for 30 seconds to ensure it is firmly attached to the wall. If you would prefer your Water Sensor to be more secure, slide the Water Sensor up off of its bracket, and use the included screws to permanently attach the bracket to a surface. Once you have finished, slide the Water Sensor back onto its bracket, and it is installed.
