Incomplete Recordings for Cameras

Incomplete camera recordings can often be a symptom of an underlying network connectivity issue. To rule out any temporary connectivity issues, we recommend rebooting your router - especially if it’s been a while since you’ve done this. To reboot your router, simply unplug it from power for 30-60 seconds, then plug it back in. This will provide a fresh connection for your network devices.

If you’re still having trouble after a router reboot, we’d recommend using the Connection Check Tool found within the SimpliSafe® Mobile App to further analyze your network connectivity.

How to Use the Connection Check Tool

1. Tap the “Cameras” icon at the bottom of the SimpliSafe® mobile app

2. Choose the gear icon in the upper right corner to get to Camera Settings

3. Select your camera

4. Under “Connection” select “Connection Check”

5. Tap “Start Connection Check” to find your camera’s connection strength

What do my Results Mean?

Good

A good signal strength or upload speed means that there is a strong connection between your camera and Wi-Fi network. 

Fair or Poor Upload Speed

If your upload speed is fair or poor, reduce the camera’s video resolution in its settings in the SimpliSafe® mobile app. To do this:

1. Select the “Cameras” tab at the bottom of the screen

2. Tap the gear icon in the top right corner to get to Camera Settings

3. Under “Camera Settings”, select your camera

4. Navigate to “Video Quality” and choose 480p

It may also be necessary to upgrade your internet package to improve your upload speed. We recommend reaching out to your internet service provider to learn more about their offerings. 

Fair or Poor Signal Strength

If your signal strength is fair or poor, move your camera and Wi-Fi router closer together and then try running the Connection Check tool again. If your signal strength is still the same, we recommend getting a Wi-Fi extender.

It may also help to connect your SimpliSafe® devices to a different Wi-Fi network. We recommend setting up a Guest Network on your Wi-Fi router and only connecting your SimpliSafe® devices to it. To learn more about setting up a Guest Network, reach out to your internet service provider. 

Still Need Help?

If your camera is still experiencing issues connecting to your Wi-Fi network, our Support team is here to help you further.